All manufacturing processes and final finished product is as per IS: 2713 (part I&II) 1980.
Protection against corrosion
Unless or otherwise specified , the poles are coated throughout internally & externally, up to planting depth with black bituminous paint confirming to IS : 158 – 1968 specifications for ready mixed paint, brushing, bituminous black, acid, alkali, water & heat resting for general purpose. The remaining portion of exterior with red oxide primer as specified in IS: 2074-1979.
Our poles are well-finished, straight, smooth, cylindrical, clean and free from harmful surface defects. Ends of the poles are cut square.
SHAFT : Poles fabricated from steel and is tapered, 6/8/12/20 sided polygonal shape in cross section. All shafts have a full length longitudinal submerged-arc weld ground smooth providing a uniform taper. Poles up to 40’ tall are fabricated in one section. Poles over 40’ are fabricated in two to three sections for slip-fit assembly.
ANCHOR BASE PLATE : The anchor base plate is fabricated from steel and is circumferentially welded inside and outside to the pole shaft.
JUNCTION BOX : All shafts are supplied with inbuilt junction box and a weather proof cover.
FINISH : The standard finish is HOT DIP ZINC COATING .
Stepped with inbuilt junction box, grooved & conical sections.
Bracket with decorative cast iron ornamental finish.
Pole painted with base coat epoxy primer & P.U. coat of approved color.
Hadapsar: Plot No.10, FP No.83/A, Ramtekdi Co-op ind. Estate, Hadapsar, Pune - 411013.
Jejuri: A-3, MIDC Jejuri, Pune.
Mrs. Jayashree Deshmukh: 9822344292 ; Mr. B.M. Raskar: 7888003842 ; Tel.: 020 24212574